Inventory # 44321 Year: 2015

** ITEM IS SOLD - if you are looking for a similar item OR have a similar item to sell please contact us Phone 847-427-3333 or email scott@perfectionglobal.com MAZAK INTEGREX I-200 S CNC MULTI-TASKING TURNING CENTER

Request a Quote
Measurement

Specifications
  • Swing Over Bed: 25.9"
  • Turning Diameter: 16.53"
  • Turning Length: 39.8"
  • Distance Between Spindles: 41.77"
  • Chuck Size 1, 2: 8" , 8"
  • Spindle Nose 1, 2: A2-6 , A2-6
  • Spindle Bore Diameter 1, 2: 3" , 2.99"
  • Bar Capacity 1, 2: 2.56" , 2.5"
  • Spindle Speeds 1, 2: 5000 RPM , 5000 RPM
  • Spindle Power 1, 2: 30 hp , 30 hp
  • B-Axis Head Indexing: +- 120°
  • B-Axis Milling Spindle Speed: 12,000 RPM
  • B-Axis Milling Spindle Taper: CAPTO C6
  • B-Axis Milling Spindle Power: 30 hp
  • ATC for Milling Spindle: 72 ATC
  • Tool Diameter: 3.54" , 4.92"
  • Tool Length: 11.8"
  • Tool Weight: 22 lbs
  • X-Axis Travel X1, X2, X3: 24.21"
  • Z-Axis Travel Z1, Z2, Z3: 62.4"
  • Y-Axis Travel Y1, Y2, Y3: 9.84"
  • C-Axis Indexing 1, 2: .0001° , .0001°
  • W-Axis Travel Sub Spindle: 41.97"
  • Rapid Traverse Rates X1, X2, X3: 1969 IPM
  • Rapid Traverse Rates Z1, Z2, Z3: 1969 IPM
  • Rapid Traverse Rates Y1, Y2, Y3: 1575 IPM
  • Rapid Traverse Rates W - Axis: 1181 IPM
  • Show More
  • Show Less
  • Swing Over Bed: 657.86mm
  • Turning Diameter: 419.86mm
  • Turning Length: 1010.92mm
  • Distance Between Spindles: 1060.96mm
  • Chuck Size 1, 2: 203.20mm , 203.20mm
  • Spindle Nose 1, 2: A2-6 , A2-6
  • Spindle Bore Diameter 1, 2: 76.20mm , 75.95mm
  • Bar Capacity 1, 2: 65.02mm , 63.50mm
  • Spindle Speeds 1, 2: 5000 RPM , 5000 RPM
  • Spindle Power 1, 2: 22.37 kw , 22.37 kw
  • B-Axis Head Indexing: +- 120°
  • B-Axis Milling Spindle Speed: 12,000 RPM
  • B-Axis Milling Spindle Taper: CAPTO C6
  • B-Axis Milling Spindle Power: 22.37 kw
  • ATC for Milling Spindle: 72 ATC
  • Tool Diameter: 89.92mm , 124.97mm
  • Tool Length: 299.72mm
  • Tool Weight: 9.98 kg
  • X-Axis Travel X1, X2, X3: 614.93mm
  • Z-Axis Travel Z1, Z2, Z3: 1584.96mm
  • Y-Axis Travel Y1, Y2, Y3: 249.94mm
  • C-Axis Indexing 1, 2: .0001° , .0001°
  • W-Axis Travel Sub Spindle: 1066.04mm
  • Rapid Traverse Rates X1, X2, X3: 50.01 m/min
  • Rapid Traverse Rates Z1, Z2, Z3: 50.01 m/min
  • Rapid Traverse Rates Y1, Y2, Y3: 40.01 m/min
  • Rapid Traverse Rates W - Axis: 499.96 mm/sec
  • Show More
  • Show Less
Equipped With
  • Mazatrol Matrix II CNC Conversational Control
  • Auto Chuck Jaws Open & Close Main & Sub
  • Auto Door Open & Close
  • Auto TLM
  • Automatic Tool Presetter
  • Chuck Air Blow for Sub Spindle
  • Comparison Stop
  • Concept 2000 Chip Removal System
  • Cylinder
  • EIA, Spiral, EIA 3D Comp.
  • EXT-Data I/O, Shape Comp.
  • G00 Slope Constant
  • G54.1
  • Inch/mm Conversion
  • Polar Coordinates Input
  • Rotation, Geometric, Scaling
  • ROT-Axis Shape Comp.
  • Sync. Mill Tap
  • Thru Hole Draw Tubes on Main & Sub Spindles
  • Variable 600 Sets
  • Show More
  • Show Less
  • Mazatrol Matrix II CNC Conversational Control
  • Auto Chuck Jaws Open & Close Main & Sub
  • Auto Door Open & Close
  • Auto TLM
  • Automatic Tool Presetter
  • Chuck Air Blow for Sub Spindle
  • Comparison Stop
  • Concept 2000 Chip Removal System
  • Cylinder
  • EIA, Spiral, EIA 3D Comp.
  • EXT-Data I/O, Shape Comp.
  • G00 Slope Constant
  • G54.1
  • Inch/mm Conversion
  • Polar Coordinates Input
  • Rotation, Geometric, Scaling
  • ROT-Axis Shape Comp.
  • Sync. Mill Tap
  • Thru Hole Draw Tubes on Main & Sub Spindles
  • Variable 600 Sets
  • Show More
  • Show Less
Location & Terms
  • Terms: F.O.B.
  • Location: Elk Grove Village, IL
  • Disclaimer: Preliminary Specifications....

Request A Quote

Used Equipment Request
Checkboxes