This used Dallas 72″ servo coil feed line is well suited for metal stamping and coil-fed blanking operations producing wide panels, appliance housings, cabinet parts, and sheet metal blanks for subsequent forming. Its 20,000 lb. coil capacity makes it a compelling option for plants handling large coils, while the 72″ working width accommodates stock beyond the capacity of narrower press feed lines. Both the powered straightener and servo feeder are rated for 72″ × .060″ mild steel or 48″ × .125″ mild steel, supporting wide, lighter-gauge work alongside thicker material at reduced widths.

The line combines a Dallas coil reel and coil car with a seven-roll powered straightener and DRF-672 servo feed. Straightening rolls help remove coil set before stock reaches downstream tooling, while servo feeding supports repeatable material advancement for stamping and blanking. The peeler-threader, coil restrictor-debender, and dual exit threading tables assist with introducing stock through the line. A servo feed control update completed in 2015 adds another consideration for buyers evaluating this system.

Recently reduced in price, this Dallas coil line offers an attractive opportunity to add wide-coil processing capacity or replace an undersized feeding system. Located in Elk Grove Village, Illinois, it warrants evaluation by stamping plants and steel fabricators seeking substantial coil-handling capacity within a controlled equipment budget. Request a quote for this line, or compare our used coil feed lines for stamping and metal fabrication.