Send a text message to yourself or a friend
Note: On submit, this will open your devices SMS application
Message will say:
Perfection Global Equipment: https://perfectionglobal.com/used-inventory/okuma-impact-lu45-48762/
Specifications
- Swng over Bed 33"
- Swing Over Saddle 21.85
- Maximum Turning Diameter 25.59"
- Maximum Turning Length 118"
- X- Axis Travel Upper Turret:17.3"
- Z-Axis Travel Upper Turret:121.6"
- Spindle Hole 10.24"
- Spindle Speeds ___ to ___
- Spindle Nose A2-20
- Turrets (2)
- Turret Positions Upper:8, Lower: 10
- Tailstock Quill 5.12"
- Tailstock Taper MT 5
- Tailstock Quill Travel 6.69"
- Show More
- Show Less
- Swng over Bed 838.20mm
- Swing Over Saddle 21.85
- Maximum Turning Diameter 649.99mm
- Maximum Turning Length 2997.20mm
- X- Axis Travel Upper Turret: 439.42mm
- Z-Axis Travel Upper Turret: 3088.64mm
- Spindle Hole 260.10mm
- Spindle Speeds ___ to ___
- Spindle Nose A2-20
- Turrets (2)
- Turret Positions Upper:8, Lower: 10
- Tailstock Quill 130.05mm
- Tailstock Taper MT 5
- Tailstock Quill Travel 169.93mm
- Show More
- Show Less
Equipped With
- EQUIPPED WITH
- Okuma OSP-P200L CNCControl
- (2) 24"3-Jaw Air Chucks
- Chip Conveyor / Coolant System
- Chip Blaster High Pressure Coolant
- Show More
- Show Less
- EQUIPPED WITH
- Okuma OSP-P200L CNCControl
- (2) 609.60mm 3-Jaw Air Chucks
- Chip Conveyor / Coolant System
- Chip Blaster High Pressure Coolant
- Show More
- Show Less
Location & Terms
- Terms: As Is, Where Is
- Disclaimer: Preliminary Specifications....